User Guide

Administration.....97
Services Tab
To create a service definition:
1. From the sidebar, click Firewall and NAT, then click the Services tab.
2. In the Service Name field, enter a name to be used for the service.
NOTE: Aservice name can be between 3-40 alphanumeric characters.
3. In the ServiceAddress field, enter a valid subnet IDfor the service in CIDRformat. For
example, 192.168.10.0/24.
4. Enter the starting and ending ports for the IPprotocol.
NOTE: Valid entries are from 0-65,535.
5. Click Apply. The new service definition will be displayed in the user-defined service definition
table.
To modify or delete a user-defined service definition:
1. From the sidebar, click Firewall - NAT, then click the Services tab.