User Guide

Administration.....95
Hosts Tab
To add a host:
1. From the sidebar, select Network - Hosts.
2. Click Add to add a new host.
3. Enter a name to represent the host, an IPv4 Address and the physical or virtual interface
which can communicate with this host. Then click Apply. The new host definition will appear in
the User Defined Hosts table.
NOTE: The network interface must be one listed on the Interfaces tab.
To delete a host:
1. From the sidebar, select Firewall and NAT - Hosts.
2. Click on the name of the host you want to delete, then click Delete.