Manualshelf

User's Manual

ManualsBrandsEmerson ManualsInfrastructure ManagementEmerson Avocent Rack Power Manager
81828384858687888990
3. In each address field, type the IP addresses in standard dot notation (xxx.xxx.xxx.xxx) or
the domain name for the computer that handles traps. Up to four computers may be
specified.
4. Click Save to store the trap information in the Rack Power Manager software database on
the host.
Client session information
To specify client session information:
1. Click the System tab.
2. Click RPM Client Sessions in the side navigation bar. The RPM Server Client Session
Properties window opens. The number of client sessions currently in use is displayed.
3. Use the arrows to specify a time-out value (from 5-60 minutes) for inactivity of a Rack
Power Manager user client session. The default is 15 minutes. When the time-out value has
been exceeded, the session will end and the user must log in again.
4. Check the Enable certificate authentication checkbox to allow the Rack Power Manager
software to automatically log in internal users if the user certificate (X.509 digital ID)
installed in the Rack Power Manager software client web browser matches the certificate
configured for the user. Certificates for users may be modified. See User certificates on
page 216.
Web browser settings may need to be modified to allow users to automatically log in
using certificates; see your web browser documentation.
-or-
Check the Enable Integrated Windows
®
Authentication checkbox to automatically log
a user into the Rack Power Manager software using the Windows user’s computer
credentials.
Web browser settings may need to be modified to allow users to automatically log in
using Integrated Windows Authentication; see your web browser documentation.
5. To enable only Rack Power Manager software clients with IP addresses entered in the
Address List to communicate with managed appliances, check the Restrict by address
range checkbox. To disable address restrictions for logging into the Rack Power Manager
software, uncheck this checkbox.
6. Enable or disable Allow login when user is a member of more than one authentication
service as desired. The preset value is disabled. When enabled, if a user belongs to multiple
authentication services, the Rack Power Manager server uses the first authentication service
Chapter 6: Rack Power Manager Servers 69