Manualshelf

User's Manual

ManualsBrandsEmerson ManualsInfrastructure ManagementEmerson Avocent Rack Power Manager
81828384858687888990
3. In the Spoke Servers window, click Certificate. The Spoke Server Certificate window will
open including information about the spoke server certificate (Actual Certificate) and the
certificate registered for this spoke server on the hub server (Registered Certificate).
4. The window displays the certificate on the spoke server and the certificate registered on the
hub server.
If the Rack Power Manager management software cannot obtain the certificate
information from the spoke server, a message will appear at the bottom of the RPM
Server Certificate - Spoke Server window. The message states: Remote server is not
responding. Information displayed may not match remote side.
• If the certificate information does not match, go to step 5.
• If the certificate information matches, go to step 6.
5. Click Update. The spoke server certificate information will be updated on the hub server.
6. Click Close. The Spoke Servers window will open.
To update the certificate of a hub server on a spoke server:
1. On the spoke server, click the System tab. RPM Server will automatically be selected in the
top navigation bar and the name of the spoke server will appear at the top of the side
navigation bar.
2. Click Hub Server in the side navigation bar. The Hub Server window will open.
3. In the Hub Server window, click Certificate. The Hub Server Certificate window will open
including information about the spoke server certificate (Actual Certificate) and the
certificate registered for this spoke server on the hub server (Registered Certificate).
If the Rack Power Manager software cannot obtain the certificate information from the
hub server, a message will appear at the bottom of the RPM Server Certificate - Hub
Server window. The message states: Remote server is not responding. Information
displayed may not match remote side.
If the certificate information does not match, go to step 4.
4. Click Update. The hub server certificate information will be updated on the spoke server.
Server trap destinations
To specify trap destinations:
1. Click the System tab.
2. Click Trap Destinations in the side navigation bar. The RPM Server Trap Destinations
window will open.
68Rack Power Manager Installer/User Guide