User's Manual

c. Type the name of the organizational division or name under which the organization is
doing business.
d. Type the complete city or location name. The City or Location field is required for
organizations registered only at the local level.
e. Type the complete name of the state or province where the organization is located.
f. Type the two-character ISO country code for the country where the organization is
located.
g. Click Next. Go to step 7.
6. The Select Certificate to Import window will open.
Type the full directory and filename for the SSL certificate file you wish to import to
the Rack Power Manager server or browse to the file location.
The name of the SSL certificate file must be entered in case sensitive text if your
operating system supports case sensitive filenames.
Imported certificates must have been generated from a CSR created on the same Rack
Power Manager server to which you are importing the certificate.
h. Click Next.
7. The Completed Successful window will open.
8. Click Finish. The RPM Server Certificate Properties window will open, containing updated
certificate information.
Managing hub and spoke server certificates
When a spoke server is registered with a hub server, a certificate trust relationship is established
between the two servers. Certificate information must match on the hub server and the spoke
servers for communication to take place between the servers. If the spoke server certificate is
subsequently changed, a certificate mismatch will occur.
To update the certificate of a spoke server on the hub server:
NOTE: Certificates may only be viewed by Rack Power Manager software administrators and user administrators.
1. On the hub server, click the System tab. RPM Server will automatically be selected in the
top navigation bar and the name of the Rack Power Manager software hub server will
appear at the top of the side navigation bar.
2. Click Spoke Servers in the side navigation bar. The Spoke Servers window will open.
Chapter 6: Rack Power Manager Servers 67