User's Manual

Importing the Data
To Import DSView database from a Windows Operating System:
1. To launch the migration utility, from the Windows server, click Start - All Programs -
Emerson - RPM1.0 - RPMDataMigrationUtility.
2. Click Next to continue.
3. Select DSView4 to RPM 1.0 and click Next.
4. Enter the server IP address of the RPM software hub server.
5. Enter the listening port for your hub server in the DB Server Port field.
6. Enter the database name in the DB Name field.
7. Enter the database username in the Username field.
8. Enter the password for the database in the Password field.
9. Browse or enter the location of the DSView4 Database in the DSView4 DB field. This is
the postgresbackup.tar file that was extracted from the DSView4 backup
10. Click Next.
11. Assign the servers for migration and click Next.
12. Confirm the server assignments and click Next.
13. Click Finish.
To Import DSView Database from a Linux Operating System:
1. Navigate to the RPMDataMigrationUtility folder. By default, this folder is located at
/usr/local/Emerson/RackPowerManager/RPMDataMigrationUtility. To launch the migration
utility, enter ./DBMigration.sh from the command line.
2. Click Next to continue.
3. Select DSView4 to RPM 1.0 and click Next.
4. Enter the server IP address of the RPM software hub server.
5. Enter the listening port for your hub server in the DB Server Port field.
6. Enter the database name in the DB Name field.
7. Enter the database username in the Username field.
8. Enter the password for the database in the Password field.
Chapter 3: Transition 25