User's Manual

8. Enter the database name in the DB Name field.
9. Click Next.
10. In the DSView Hub Database field, enter or browse to the location that you saved the
DSView 3 software export file.
11. In the PMP Database field, enter the path or browse to the location of the exported PMP
database file.
12. Click Next.
13. Assign the data from servers on your DSView System to your RPM System and click Next.
14. Confirm the server assignments and click Next.
15. In case you have assigned data to RPM spoke server, you will be prompted for the DB
server port, user name and password of the spoke DB server. Enter these details and click
Next.
16. Click Finish.
To Import PMP Database from a Linux Operating System:
1. Navigate to the RPMDataMigrationUtility folder. By default this folder is located at
/usr/local/Emerson/RackPowerManager/RPMDataMigrationUtility. To launch the migration
utility, enter ./DBMigration.sh from the command line.
2. Click Next to continue.
3. Select DSView3+PMP to RPM 1.0 and click Next.
4. Enter the server IP address of the RPM software hub server.
5. Enter the listening port for your hub database server in the DB Server Port field.
6. Enter the database username in the Username field.
7. Enter the password for the database in the Password field.
8. Enter the database name in the DB Name field.
9. Click Next.
10. In the DSView Hub Database field, enter or browse to the location that you saved the
DSView 3 software export file.
11. In the PMP Database field, enter the path or browse to the location of the exported PMP
database file.
12. Click Next.
Chapter 3: Transition 21