User's Manual
To export the DSView 3 software data from a Linux® operating system:
1. Navigate to the DSViewDataMigrationUtility folder, By default this folder is located at
/usr/local/Emerson/RackPowerManager/DSViewDataMigrationUtility. To launch the
migration utility, enter ./DataMig.sh from the command line.
2. Choose option number two to export the data.
3. From the menu, enter the server type.
a. Choose Hub, if you are exporting data from the hub.
b. Choose Spoke if you are exporting data from the spoke.
4. Select DSView for the Database Type when you are specifying a DSView software backup.
-or-
Select PMP for the Database Type when you are specifying backup of the Power
Management database. If you have both DSView software backup and Power
Management database backup, you will have to run the utility twice to select both the
options.
5. Input the location of the DSView Software backup or PMP database backup file. If using a
PMP database backup file, this is the zip file of the etc folder that was created previously.
6. Input the location to save the Migration File.
7. Verify the settings and enter Y to continue with the export.
Importing the Data
The RPM data migration utility migrates the exported data you get from the previous steps into
the RPM database.
To Import DSView or DSView + PMP database from a Windows Operating System:
1. To launch the migration utility, from the Windows server, click Start - All Programs -
Emerson - RPM1.0 - RPMDataMigrationUtility.
2. Click Next to continue.
3. Select DSView3+PMP to RPM 1.0 and click Next.
4. Enter the server IP address of the RPM software hub server.
5. Enter the listening port for your hub database server in the DB Server Port field.
6. Enter the database username in the Username field.
7. Enter the password for the database in the Password field.
20Rack Power Manager Installer/User Guide