User's Manual

6. The Adding Plug-in page will open while the plug-in is added to the Rack Power Manager
software system.
7. The Completed Successful window will open. Click Finish.
NOTE: If you added a plug-in for a Cyclades™ appliance, you must disable the Cyclades Web Manager to maintain
security standards. For information about how to disable the Cyclades Web Manager, see the online help for the
Cyclades appliance plug-in.
Displaying Plug-in Information
You may display information about all plug-ins that have been added as well as information
about a single plug-in on the Rack Power Manager server where you are logged in.
To display plug-in information:
1. Click the System tab.
2. Click Plug-ins in the top navigation bar. The Plug-ins window will open.
3. To display information about one plug-in, click the plug-in name. The Plug-in overview
window will open.
Information in the Overview area is read-only.
The RPM Servers table lists the status of the plug-in on each Rack Power Manager
server. Each row includes the name of the server and the plug-in version plus the
administrative and operational status of the plug-in on that server.
Table 23.1: Plug-ins Display Information
Field Description
Name Plug-in name, acquired from the plug-in.
Version
Plug-in version (on this server), acquired from the plug-in when it was added or
upgraded.
Overall Status
Same - The plug-in’s operational status, administrative status and version is the same
on all Rack Power Manager servers. Mixed - The plus-in’s operational status, admin-
istrative status and version is not the same on all Rack Power Manager servers.
Chapter 23: Plug-ins 293