User's Manual

Customizing the Appliance Firmware Files window
The Version, firmware Type, Appliance Type, Creation Date and Time, Description, Language
and Country fields may appear in the display. Use the Customize link to add or remove fields
in the display. See Using the Customize link in windows on page 30.
To add a firmware file:
1. Click the System tab.
2. Click Appliance Files in the top navigation bar. The Appliance Firmware Files window
will open.
3. Click Add. The Add Firmware File Wizard will appear.
4. Enter the directory and filename (or browse to the location) of the firmware file you want
to add to the Rack Power Manager software appliance files repository.
5. Type a description of the firmware file in the Description field.
6. Click Next. The firmware is added and the Completed Successful window appears.
7. Click Finish. The Appliance Firmware Files window will open.
NOTE: Once the file is uploaded, it is no longer needed on the Rack Power Manager software client from which it
was uploaded.
To display firmware information:
1. Click the System tab.
2. Click Appliance Files in the top navigation bar. The Appliance Firmware Files window
will open.
3. Click on the version of a firmware file. The Firmware File Properties window will open.
4. The display includes the firmware version, appliance type, firmware creation date, country
and language of the firmware. If you wish, you may change the description of the firmware
file in the Description field.
5. Click Save and then click Close. The Appliance Firmware - All window will open and
contain the firmware information if you saved the changes.
To delete firmware:
1. Click the System tab.
2. Click Appliance Files in the top navigation bar. The Appliance Firmware Files window
will open.
3. Click the checkbox next to the firmware you want to delete.
Chapter 21: Using Tasks 277