User's Manual

5. Confirm or cancel the deletion.
Changing tasks
NOTE: Remote tasks, which are scheduled on another Rack Power Manager server, may not be modified from the
Rack Power Manager server to which you are logged in. To change a remote task, you must log in to the Rack
Power Manager server on which the task was created.
You may change the schedule and properties for existing tasks. (The Validate external
authentication server user accounts task does not contain properties.)
To change a task schedule:
1. Click the System tab.
2. Click Tasks in the top navigation bar. The Tasks window will open.
3. Click on the name of the task.
4. Click Schedule in the side navigation bar. The Task Schedule window will open. Select
the type of task you wish to schedule and complete the information. See Specifying when
to run tasks on page 262.
To change the properties of a task:
1. Click the System tab.
2. Click Tasks in the top navigation bar. The Tasks window will open.
3. Click on the name of the task.
4. Click Properties in the side navigation bar. The Task Properties window will open.
5. Change the properties of the task. See the operating sequence for the task type in Adding
Tasks Using the Add Task Wizard on page 265.
Firmware Management
The Flash firmware files for DS1800 digital switches, DSI5100, CPS and CCM appliances and
DSR switches may be added, viewed and deleted using the Appliance Firmware Files window.
Once a Flash firmware file(s) has been added, you may use the file(s) to upgrade the managed
appliance.
To display the Appliance Firmware Files window:
1. Click the System tab.
2. Click Appliance Files in the top navigation bar. The Appliance Firmware Files window
will open.
276Rack Power Manager Installer/User Guide