User's Manual
b. Enable the Delete target devices that no longer have connections checkbox to delete
those target devices permanently from the Rack Power Manager software database.
c. Enable the Allow target devices with the same name to be merged into a single target
device checkbox to allow the Rack Power Manager software to treat multiple target
devices with the same name as one unit with multiple access methods.
d. Enable the Allow target devices that contain default names to be added checkbox to
allow target devices that have default names in the managed appliances to be added to
the Rack Power Manager software database.
e. Click Next.
3. If the unit does not require resynchronizing, the Completed Successful window will open.
If the unit requires resynchronizing, the Changes Detected in Appliance window will
open. Click Next and go to step 7.
If one or more cascade switches are attached to the KVM switch, the Cascade Switch
Configuration window will open. Go to step 4.
4. Select the type of each detected cascade switch.
5. Type a name for each cascade switch.
6. Optionally, combine any multiuser cascade switches. Click the checkboxes of the cascade
switches that you wish to merge, and then click Merge.
To unmerge any cascade switches that you have merged, click the checkbox of the
merged cascade switch and then click Split.
7. Click Next. The Completed Successful window will open.
8. Click Finish. The Unit Overview window will open.
Saving a managed appliance configuration
You may save the configuration of a PDU to a file. The configuration file will contain
information about the managed appliance, including the following:
• Global settings
• Port settings
• SNMP trap settings
• SNMP manager settings
• The names of connected target devices
258Rack Power Manager Installer/User Guide