User's Manual
Importing data
You can use the Import Data Wizard to migrate data from the AlterPath
™
Manager to the Rack
Power Manager software. First, you will need to export the data from the AlterPath Manager
into an XML format that is recognized by Rack Power Manager software. See the AlterPath
Manager Data Migration Technical Bulletin for more information.
To import data:
1. Click the Units tab.
2. Click Tools in the side navigation bar. The Unit Tools window will open.
3. Click the Import Data icon or link. The Import Data Wizard will appear.
4. In the File field, type the path and name of the import file or browse to the file location.
The file must be a valid Rack Power Manager software data import file in an XML format.
Click Next.
5. The Select Import Options window will open. Specify the User Password Options. Select
Set the user’s password to the user’s username or Set the user’s password to a default
value. If you choose a default password value, type a 3-64 character password in the
Password and Confirm Password fields.
6. Specify the Account Options. Depending on which options you choose, you may select
multiple checkboxes. Only valid combinations will be enabled. You may choose from the
following options:
• Disable user account
• User must change password at next login
• User cannot change password
• Password never expires
7. Click Next. The Import In Progress message will display until the import attempt is
complete. If the import is successful, the Completed Successful window will open and
display a summary of the results.
If the import was not successful, the Completed Unsuccessful window will open and
display the errors that caused the import to fail. If some items could not be imported, a
message will direct you to a .csv file with more information. You may attempt to
import the data again.
8. Click Finish.
254Rack Power Manager Installer/User Guide