User's Manual

-or-
If the TACACS+ service you selected is configured to use the group name custom
attribute method, the Specify External Group Name window will open and display a
Name field. Type the name for the external user group on the external authentication
service. The group name must correspond to one of the values configured in the
TACACS+ service.
Click Next.
5. Select a role for the user group(s), then click Next. See Built-in User Groups on page 43 for
information about user roles.
6. From the Preemption Levels menu, select a preemption level from 1-4; the higher the
number, the higher the preemption level.
7. Click Finish.
Deleting User-defined User Groups
You may delete any user-defined user groups that have been created in the Rack Power
Manager software system. You must have Rack Power Manager software administrator or user
administrator rights to delete user-defined user groups.
To delete a user-defined user group:
1. Click the Users tab. Click Groups in the top navigation bar. Click User-Defined in the side
navigation bar. The User Groups - User Defined window will open.
2. Click the checkbox to the left of the user group(s) to be deleted. To delete all user groups
listed in the window, click the checkbox to the left of Name at the top of the list.
3. Click Delete. A confirmation dialog box will appear.
4. Confirm or cancel the deletion.
User Group Properties
To display the properties of a built-in user group:
1. Click the Users tab. Click Groups in the top navigation bar. Built-In will automatically be
selected in the side navigation bar and the User Groups - Built-in window will open.
2. Click on a user group name. The User Group Properties window will open. The display
includes read-only properties for each group: name, type and preemption level.
3. Click Close when you are finished. The User Groups - Built-in window will open.
Chapter 18: User Groups 227