User's Manual
4. To add or remove a unit or unit group from the Unit and Unit Groups list, click Edit List.
The User Access Rights Unit Selection window will open.
• To add one or more units/unit groups, select the units/groups in the Available list, then
click Add. The units/unit groups will be moved to the List to Update list.
• To remove one or more units/unit groups, select the units/groups in the List to Update
list, then click Remove. The units/unit groups will be moved to the Available list.
(Inherited users and user groups can only be removed from the first unit group that
specified any access rights other than inherit.)
5. Click OK. The User Access Rights window will display the current list of units/unit
groups.
6. To add/remove access rights for a unit/unit group, select a unit or unit group from the Unit
and Unit Groups list, then enable or disable a checkbox in the Access Rights table for each
access right.
• Allow - the access right is allowed for the user.
• Deny - the access right is denied for the user.
• Inherit - the access right is inherited from the unit group(s) to which the selected
unit/unit group belongs. When Inherit is selected, the Allow and Deny checkboxes
will become gray and unchangeable, and indicate the inherited value. If the inherited
settings indicated both Allow and Deny, the inherited value is Deny, which takes
precedence.
To disable the inherit functionality, uncheck the Inherit checkbox.
• If none of the checkboxes are checked, the access right is neither allowed nor denied.
7. Repeat the preceding step for other units/unit groups.
8. Click Save and then click Close.
222Rack Power Manager Installer/User Guide