User's Manual

3. Specify the highest level zone for which you have access rights by typing the zone in the
Zone field.
-or-
Specify the highest level zone for which you have access rights by selecting a zone
name from the Zone menu.
NOTE: If you do not specify a zone, Rack Power Manager software attempts to log you in to the top level zone. If
you do not have access rights to the top level zone, the login attempt fails.
4. Click Login.
To switch zones:
Click the System tab, then click Zones. The Zones window opens and lists all created zones.
Select the checkbox next to the zone to which you want to switch and click Switch.
-or-
In the top left corner of the window, your username and the active zone list is displayed. Click
the name of the zone to open a pop-up menu, then select the zone to which you want to
switch.
Transferring units to a zone
You can transfer managed appliances, blade chassis, hypervisor managers or hypervisor servers
to zones for which you have access rights. All associated target devices are transferred with the
unit, and any merged target device connections are split. You cannot independently move a
target device.
NOTE: If you are transferring units that require licenses, the zone to which you are moving the units must be
assigned the appropriate licenses (see Assigning zone licenses on page 200). If the zone does not have sufficient
licenses, the transfer fails.
1. In a Units View window (see Accessing Units View windows on page 111), click the
checkbox next to the unit(s) you wish to move.
2. Click Operations, then select Move Units to Zone from the drop-down menu. The Move
Units Wizard opens.
3. From the list provided, select the zone to which you wish to move the unit(s). Click Next.
4. The Completed Successful window opens. Click Finish.
You can access the units and associated target devices when you are active in the zone that
owns the units.
Chapter 16: DS Zones 199