User's Manual

To control power from a Units View window:
1. In a Units View window containing power devices, click the checkbox next to the power
device(s). To select all power devices in the page, click the checkbox to the left of Name at
the top of the list. (If any of the selected units are not power devices, the operation will be
ignored for them.)
2. Click Operations, then select Wall Power On, Wall Power Off or Wall Power Cycle from
the drop-down menu.
3. A Multiple Unit Operation window will open, containing a link to view results; see
Multiple unit operations from a Units View window on page 115.
Power Operations
To perform power operations on a power device or rack:
1. Click the Units tab.
2. Click Units in the top navigation bar.
3. Click Power Manager or Infrastructure in the side navigation bar.
4. Click on a power device or rack name. The Unit overview window opens. Click the
corresponding Tools icon or link to turn on, turn off or power cycle the power device.
-or-
Select the power device(s) from the list and select Power Unit On, Power Unit Off or
Power Cycle Unit from the Operations menu.
Chapter 12: Power Devices and Power Device Sockets 163