User's Manual

Some fields are read-only. For fields that can be modified, enter or select new values.
(If you change the appliance name and the automatic name pull feature is enabled, see
Automatic name pull on page 126 for the effect.)
6. Click Save and then click Close. The Power Device Sockets window will open.
7. Click Close. The Power Devices Attached to Appliance window will open.
8. Click Close. The Units View window will open.
Power Control of Devices Attached to Power Devices
There are several ways to power up, power down or power cycle a target device that is attached
to a power device socket.
• From a Power Device Sockets window
• From a Units View window containing power devices
• From the Video Viewer - see Power Control of Devices Attached to Power Devices on
page 249
• From the Telnet Viewer - see Power Control of Devices Attached to Power Devices on
page 249
• From the DSR Remote Operations software
To control power from a Power Device Sockets window:
1. In a Units View window containing appliances, click on the appliance name.
2. Click Appliance Settings in the side navigation bar, click Ports and then Power device in
the side navigation bar. The Power Devices Attached to Appliance window will open.
3. Click on the name of a power device.
4. Click Sockets. The Power Device Sockets window will open.
5. Click the checkbox to the left of the power device socket(s). To select all sockets on the
page, click the checkbox to the left of Socket at the top of the list.
6. Click On, Off or Cycle to power up, power down or power cycle (off and then on) the
selected power device sockets. The Power field for the selected sockets will reflect the
state.
7. For certain power device types and models, administrators may also lock or unlock a
socket’s current state by clicking Lock or Unlock. This sets the control field of the selected
socket(s) to the specified value; users other than administrators cannot change the state.
The default value is Unlock.
162Rack Power Manager Installer/User Guide