User's Manual
• Status
NOTE: To successfully add or remove a power device, the power device must be in an online state.
To add or remove a power device:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 111), click on the appliance name. The Unit Overview window will open.
2. Click Manage Power Devices in the Tools area. The Power Management Wizard will
appear.
(You may also access the Power Management Wizard by clicking the following
sequence in the side navigation bar: Appliance Settings - Ports - Power Devices -
Manage.)
3. The Select Action window will open.
• To add a power device, enable the Add Power Devices radio button.
• To remove a power device, enable the Remove Power Devices radio button.
Click Next.
4. The Select Parameters window will open.
a. In the Port menu, select the port where the power device will be added or removed.
• For a serial console appliance, select the physical port number in the Port menu.
• For an appliance supported by a plug-in, select the appropriate port value.
b. If you are adding a power device, select the type in the Power Device Type menu.
c. Click Next.
5. A Completed Successful or Completed Unsuccessful window will open, indicating the
results of the addition or removal. Click Finish.
To change power device settings:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 111), click on the appliance name.
2. Click Appliance Settings in the side navigation bar, click Ports and then Power device in
the side navigation bar. The Power Devices Attached to Appliance window will open. (For
DSR switches that have two SPC ports, one row will appear for each power device.)
3. Click on the name of a power device. The Power Device Settings window will open.
158Rack Power Manager Installer/User Guide