User's Manual

Tiered Energy Cost Setting
NOTE: Peak hours and off peak hours cannot overlap. Off peak hour energy rate cannot be more than the peak
hour energy rate.
To modify peak/off peak hour rate and time:
1. Click the Units tab.
2. Select the data center from the side navigation bar.
3. Click Power Manager - Settings - Configuration.
4. Enter the Maximum Power Consumption.
5. Enter the Peak Rate Cost per kilowatt Hour and set the desired timeframe.
-or-
Click the checkbox Off Peak Rate Same as Peak Rate, enter the Off Peak Rate Cost
per kilowatt Hour and set the desired timeframe.
6. Click Save and Close.
Chapter 11: Managing Units 155