User's Manual

Unit Reports
Unit reports display power, energy, costs, percentage load and other power management data
for a single infrastructure level or power device.
To view unit reports:
1. Click the Units tab.
2. Click Units in the top navigation bar.
3. Click Power Manager or Infrastructure in the side navigation bar.
4. Click on an infrastructure or power or environmental device name. The unit Overview
window opens.
5. Click Power Manager in the side navigation bar.
6. Click Reports.
7. Select a report from the Reports menu. Available reports vary based on the type of unit
selected and what data each unit supports.
8. Enter the date and time range for the report in the fields provided.
9. Click Run Report.
10. The report is displayed as a line graph. Click the bar chart or table view icons to change
the view, or click the interpolation icon to show only data points. If applicable, you may
click the colored boxes below the report to show or hide report data for a category.
11. (Optional) If you selected an energy report, click the dollar sign ($) icon to view cost
information. The cost is calculated based on the cost per kilowatt hour rate configured for
the data center.
12. Click Export Data if you wish to export and save the report data as .csv file.
13. Click Close.
To view status reports:
1. Click the Reports tab.
2. Click Power in the top navigation bar.
3. Select PDU or PDU Power Range from the Reports menu. The report is displayed in table
format.
4. Click Export Data if you wish to export and save the report data as .csv file.
5. Click Close.
Chapter 11: Managing Units 151