User's Manual

7. To move all members of the selected rack or row of racks to the same RPM server, select
the server name from the menu and click Save.
To configure data monitoring for racks:
1. Click the Units tab.
2. Click Units in the top navigation bar.
3. Click Power Manager or Infrastructure in the side navigation bar.
4. Click on an infrastructure level or power device. The Unit overview window opens.
5. Click Power Manager in the side navigation bar.
6. Click Monitoring in the side navigation bar.
7. Select the units you want to monitor data and click Add.
-or-
Select the units that you do not want to monitor and click Remove.
About Access Rights
Access rights indicate which users and user groups may access units in the Rack Power
Manager software system. Access rights also indicate which actions are allowed.
For target devices, you may specify whether a user or members of a user group are allowed to:
• View the unit in a Units View window (this right is enabled automatically if any other
access right for the target device is enabled)
• Control target device power
For certain managed appliances, you may specify whether a user or members of a user group are
allowed to:
• View the appliance in Units View windows (this right is enabled automatically if any
other access right for the managed appliance is enabled)
• Reboot appliance and disconnect sessions - see Importing data on page 254
• Flash upgrade appliance - see Upgrading firmware on page 256
• Configure unit settings - see Managed Appliance Settings on page 145
• Configure appliance local user accounts
Chapter 11: Managing Units 143