User's Manual

To view the status:
1. Click the Units tab.
2. Click Units in the top navigation bar.
3. Click Power Manager or Infrastructure in the side navigation bar.
4. Click on an infrastructure level or power device. The Unit overview window opens.
5. Click Power Manager in the side navigation bar.
6. Click Status in the side navigation bar. The latest power monitoring data gathered for the
unit is displayed. Data provided varies based on the unit selected but may include current,
power and voltage for each phase, total current, power and voltage, humidity and
temperature. The list also displays if any thresholds were exceeded for any value.
7. Click Close.
To configure power units:
1. Click the Units tab.
2. Click Units in the top navigation bar.
3. Click Power Manager or Infrastructure in the side navigation bar.
4. Click on an infrastructure level or power device. The Unit overview window opens.
5. Click Power Manager in the side navigation bar.
6. Click Configuration in the side navigation bar.
7. If you selected infrastructure level, enter the maximum power consumption in watts in the
field provided. If you selected a data center, also enter the cost per kilowatt hour in the
filed provided. This information is required for data center cost reports.
-or-
If you selected a power device, configuration data received from the power device is
displayed. In the Settings area, enter the maximum total current, maximum power
consumption, maximum current phase and maximum power consumption per phase in
the fields provided. The appropriate values for these settings can be found on the label
on the power device hardware; see the power device installer/user guide for more
information.
8. Click Save, then click Close.
To modify thresholds for rows of racks, racks or power devices:
1. Click the Units tab.
Chapter 11: Managing Units 141