User's Manual

• Type the Telnet port number to use for Telnet connections to the target device. If this
field is left blank, Telnet will not be enabled for the target device.
• Type the URL for a web browser connection to the target device.
• Select the Rack Power Manager server that is in charge of the target device.
3. Click Save and then click Close. The Units View window will open.
To change the network properties for a managed appliance:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 111) click on the appliance name.
2. Click Properties in the side navigation bar and then click Network in the side navigation
bar. The Unit Network Properties window will open.
• Type the address or the fully qualified domain name.
If you are changing the appliance IP address, you should first change it in the
Appliance Network Settings window before changing it in the Unit Network
Properties window. See Managed Appliance Settings on page 145.
• Select the Rack Power Manager server in charge of the managed appliance.
3. Click Save and then click Close. The Units View window will open.
To change the Rack Power Manager server network property for one or more units
from a Units View window:
1. In a Units View window (see Accessing Units View windows on page 111), click the
checkbox next to the unit(s). To change the Rack Power Manager server property for all
units in the page, click the checkbox to the left of Name at the top of the list. (If the page
contains units that do not support note properties, they will not be affected.)
2. Click Operations, then select Properties from the drop-down menu.
3. The Multiple Unit Properties window will open. Click Network. Select the Rack Power
Manager server in charge of the units.
4. Click Save and then click Close. The Units View window will open.
Unit Overview Settings
You can configure settings for any level of the infrastructure (company, data center, row of
racks or racks), or for individual power and environmental devices.
140Rack Power Manager Installer/User Guide