User's Manual

checkbox to the left of Name at the top of the list. (If the page contains units that do not
support custom fields, they will not be affected.)
2. Click Operations, then select Properties from the drop-down menu.
3. The Multiple Unit Properties window will open. Click Custom Fields.
4. Type the information in each of the custom fields.
5. Click Save and then click Close. The Units View window will open.
To change the note properties for a unit:
1. In a Units View window (see Accessing Units View windows on page 111), click on the
appliance or target device name.
2. Click Properties in the side navigation bar and then click Notes in the side navigation bar.
The Unit Notes window will open. Type description, accounting and comment
information.
3. Click Save and then click Close. The Units View window will open.
To change the note properties for one or more units from a Units View window:
1. In a Units View window (see Accessing Units View windows on page 111), click the
checkbox next to the unit(s). To change note properties for all units in the page, click the
checkbox to the left of Name at the top of the list. (If the page contains units that do not
support note properties, they will not be affected.)
2. Click Operations, then select Properties from the drop-down menu.
3. The Multiple Unit Properties window will open. Click Notes.
4. Type description, accounting and comment information.
5. Click Save and then click Close. The Units View window will open.
To change the network properties for a target device:
NOTE: Defining incorrect information for these properties may cause network connection errors.
1. In a Units View window containing target devices (see Accessing Units View windows on
page 111), click on the target device name.
2. Click Properties in the side navigation bar and then click Network in the side navigation
bar. The Unit Network Properties window will open.
• Type the address or the fully qualified domain name for the target device.
Chapter 11: Managing Units 139