User's Manual
4. Type or use the menus to specify the site, department and/or location for the units.
5. Click Save and then click Close. The Units View window will open.
To change the contact properties for a unit:
1. In a Units View window (see Accessing Units View windows on page 111), click on the
appliance.
2. Click Properties in the side navigation bar and then click Contacts in the side navigation
bar. The Unit Contacts window will open. Type the names and phone numbers of the
primary and secondary contacts.
3. Click Save and then click Close. The Units View window will open.
To change the contact properties for one or more units from a Units View window:
1. In a Units View window (see Accessing Units View windows on page 111), click the
checkbox next to the unit(s). To change contact properties for all units in the page, click
the checkbox to the left of Name at the top of the list. (If the page contains units that do
not support contact properties, they will not be affected.)
2. Click Operations, then select Properties from the drop-down menu.
3. The Multiple Unit Properties window will open.
• To change the primary contact information, click Primary Contact. Type names and
phone numbers for the primary contact.
• To change the secondary contact information, click Secondary Contact. Type names
and phone numbers for the secondary contact.
4. Click Save and then click Close. The Units View window will open.
To change the custom fields for a unit:
1. In a Units View window (see Accessing Units View windows on page 111), click on the
appliance.
2. Click Properties in the side navigation bar, then click Custom Fields in the side navigation
bar. The Unit Custom Fields window will open. To change information, type the
information in each of the custom fields.
3. Click Save and then click Close. The Units View window will open.
To change the custom fields for one or more units from a Units View window:
1. In a Units View window (see Accessing Units View windows on page 111), click the
checkbox next to the unit(s). To change custom fields for all units in the page, click the
138Rack Power Manager Installer/User Guide