User's Manual

columns, or specify which columns are displayed by clicking Select Columns. Select the
properties that you want to be displayed, click Add, then click Save.
4. To edit unit properties, type the values in the appropriate fields. To quickly navigate the
spreadsheet, use the Tab and Shift + Tab keystrokes to move right and left and the Enter
and Shift + Enter keystrokes to move down and up.
5. Click Save.
To change the identity properties for a unit:
NOTE: Identity properties are visual representations only. Defining incorrect information may cause confusion (for
example, mistyping a serial number).
1. In a Units View window (see Accessing Units View windows on page 111), click on the
appliance.
2. Click Properties in the side navigation bar. The Unit Identification Properties window will
open. To change information, type a part number, serial number, model number and/or asset
tag number.
3. Click Save and then click Close. The Units View window will open.
To change the location properties for a unit:
NOTE: Location properties are visual representations only. Defining incorrect information may cause confusion (for
example, a mistyped room number).
1. In a Units View window (see Accessing Units View windows on page 111), click on the
appliance.
2. Click Properties in the side navigation bar and then click Location in the side navigation
bar. The Unit Location Properties window will open.
3. Type or use the menus to select the site, department and/or location for the unit.
4. Click Save and then click Close. The Units View window will open.
To change the location properties for one or more units from a Units View window:
1. In a Units View window (see Accessing Units View windows on page 111), click the
checkbox next to the unit(s). To change location properties for all units in the page, click
the checkbox to the left of Name at the top of the list. (If the page contains units that do
not support location properties, they will not be affected.)
2. Click Operations, then select Properties from the drop-down menu.
3. The Multiple Unit Properties window will open. Click Location.
Chapter 11: Managing Units 137