User's Manual
To disable automatic topology synchronization, disable the Update Rack Power
Manager with topology changes from appliances automatically checkbox and go to
the last step.
5. Click Save.
Topology synchronization options in the Add Unit Wizard
The Select Options window in the Add Unit Wizard allows you to specify the access mode and
certain topology synchronization options.
• Enable/disable secure mode
This window is described in Adding Units on page 119.
Each of these options has a default value, which you may change.
To change the default values of the options in the Add Unit Wizard:
1. Click the System tab.
2. Click Global Properties in the top navigation bar.
3. Click Wizard Defaults in the side navigation bar, then click Add Unit Wizard.
4. The Add Unit Wizard Default Options window will open.
5. If you enable the Enable secure mode checkbox, by default, the unit will only be
accessible by this Rack Power Manager software system. In non-secure mode, the unit may
be added to multiple Rack Power Manager software systems.
6. If a target device has a default name, you may indicate that, by default, it can be added to
the Rack Power Manager software database only if it supports specific connection type(s)
in the appliance. Enable the checkboxes for the specific connection types.
7. Click Save.
Topology synchronization options in the Resync Wizard
The Select Resync Options window in the Resync Wizard allows you to specify certain
topology synchronization options.
• Remove offline connections
• Delete target devices that no longer have connections
This window is described in Resynchronizing units on page 257.
Each of these options has a default value, which you may change.
130Rack Power Manager Installer/User Guide