User's Manual

Manual name push
You may initiate a manual name push from a Units View window (see below) and from the
following windows:
• Power Device window - see Power Devices on page 157
• Power Device Sockets window - see Power Device Sockets on page 160
To initiate a name push operation from a Units View window:
1. In a Units View window (see Accessing Units View windows on page 111), click the
checkboxes next to one or more units. To select all units on the page, click the checkbox
to the left of the heading at the top of the list.
2. Click Operations, then select Push Names to Appliance from the drop-down menu.
3. The Multiple Unit Operations window will open, containing a link to the Operation
Results window; see Multiple unit operations from a Units View window on page 115.
Manual name pull
Table 10.3 describes what occurs when a name pull operation is initiated.
Table 10.3: Manual Name Pull Operation Effects
When pull is ini-
tiated for one or
more:
The effect is
Appliance serial ports
The target device name will be pulled from the appliance to update the target device
name in the Rack Power Manager software database.
Power devices
The power device name will be pulled from the appliance to update the power device
name in the Rack Power Manager software database.
Power device sockets
The target device name will be pulled from the appliance to update the target device
name in the Rack Power Manager software database.
You may initiate a manual name pull from a Units View window and from the following
windows:
• Power Device window - see Power Devices on page 157
• Power Device Sockets window - see Power Device Sockets on page 160
128Rack Power Manager Installer/User Guide