User's Manual

• Managed appliances - Name and type of managed appliances and the tools that may be
used to:
• Reboot
• Upgrade firmware
• Resynchronize
• Save or restore the configuration
• Save or restore the user database
The available tasks depend on the type of managed appliance and the user’s access
rights on the managed appliance. (Custom tools defined by a plug-in may also be
available.)
You may change the overview information for one target device from a Unit Overview
window. From a Units View window, you can change the type or icon for several target
devices in one operation. This may be helpful when you want to assign the same values to
several units. See Unit Properties on page 136.
Other types of Unit Overview windows may be supported by plug-ins; see the plug-in
documentation for more information.
To change the name of a managed appliance from the Unit Overview window:
1. In a Units View window containing appliances (see Accessing Units View windows on
page 111), click on the name of an appliance. The Unit Overview window will open.
2. Type a name for the managed appliance. (You cannot change the type.)
3. Click Save and then click Close. The Units View window will open.
Unit Status Window
To use the Unit Status window:
1. Click the Units tab, then click Unit Status in the side navigation bar.
2. The Unit Status window opens.
3. You can filter what units are displayed by selecting a status from the Filter menu. Each
unit status is color-coded. The default filtered status is Active Status which displays only
currently active units.
4. You can select how often the Unit Status is updated by selecting a time from the Interval
menu.
Chapter 8: Units View Windows 117