User's Manual

To view the results of the operation, click Click here to view results.
3. The Operations Results window will open, listing all multiple unit operations and any unit
tasks that have been initiated (see Using Tasks on page 261). The entry for each operation
includes:
• Name of the operation
• When the operation started
• When the operation finished (blank if not yet complete)
• Status or result of the operation
You may also access this window at any time by clicking the Units tab, then clicking
Operation Results in the side navigation bar.
4. To view the results for an individual operation, click on the name. The Operation Results
window for that operation type will open, indicating:
• Status - Current status of the task
• Summary - Number of successful/failed/total unit operations (for example, the summary
of an operation with a status of ‘Rebooting the unit(s)’ might contain a 2/0/3 summary
- 2 successful, 0 failed and 3 total units)
• Name of the operation
• Type of unit
• When the operation started
• How long the operation took
• Status or result of the operation on the unit
5. Click Close.
Unit Overview Windows
The Unit Overview window contains the following information about an individual unit:
• Target Devices - Name, type and icon associated with the target device. You may also use
this window to connect to the target device. The available connection methods are
determined by the type of target device.
Power information appears only if the target device is a power device and the user has
power control rights. In this case, the user may power up, power down or cycle the
power of the target device.
116Rack Power Manager Installer/User Guide