User's Manual

9. If you selected RPM internal groups and the external authentication service was added
successfully, the Completed Successful window will open.
-or-
If you selected any other option, the Specify TACACS+ Server Group Authorization
Settings window will open.
a. In the Service field, type the appropriate TACACS+ service.
If you selected the privilege level attribute method in step 8, the default value
shell will appear in the field by default.
If you selected the group name custom attribute method in step 8, the default
value raccess will appear in the field by default.
b. If the TACACS+ service requires a protocol for authorization requests, type the
protocol in the Protocol field.
c. In the Attribute Name field, type the attribute name that the Rack Power Manager
server will receive after an authorization request.
If you selected the privilege level attribute method in step 8, the default value
priv-lvl will appear by default.
If you selected the group name custom attribute method in step 8, the default
value group_name will appear by default.
10. Click Next. If the external authentication service is added successfully, the Completed
Successful window will open.
11. Click Finish. The User Authentication Services window will open with the new service
listed.
To change settings for the TACACS+ external authentication service:
1. Click the Users tab.
2. Click Authentication Services in the top navigation bar. The User Authentication Services
window will open.
3. Click the name of the TACACS+ service. The side navigation bar will change to include
the name of the TACACS+ service at the top and, below the name, the information you
may define.
4. Click Connection in the side navigation bar. The Authentication Service Connection
Settings - TACACS+ window will open.
a. Type a 1-64 character name for the TACACS+ authentication service.
Chapter 7: Authentication Services 103