User's Manual
14. Click Save to save your changes.
• If you selected Use SSL in Certificate-based Trust Mode, the Certificates heading will
appear in the side navigation bar. Go to step 13.
• If you selected Do Not Use SSL or Use SSL in Trust All Mode, go to step 16.
15. Click Certificates. The Authentication Service Certificate Management - AD window
opens and list all servers in that domain. A status of Trusted indicates the certificate is
trusted, based on the certificate policy (see System certificate policy and trust store on
page 50); Untrusted indicates the certificate cannot be trusted.
16. To register certificates:
a. To select one or more certificates, click the checkbox to the left of the server IP
addresses. To select all certificates on the page, click the checkbox to the left of the IP
Address heading.
b. Click Register above the IP Address list to register the certificates. The Accept SSL
Certificate window will open.
c. Click Save to store the certificate values to the Rack Power Manager software database
on the host or click Close if you do not wish to save the certificate values.
The Authentication Service Certificate Management window will open if only
one certificate was selected. If more than one certificate was selected, each
will appear in order in subsequent Accept SSL Certificate windows.
17. To unregister certificates:
a. To select one or more certificates, click the checkbox to the left of the server IP
addresses. To unregister all certificates, click the checkbox to the left of the IP Address
heading.
b. Click Unregister to unregister the certificates.
c. A confirmation message box will appear. Confirm or cancel the operation.
18. Click Close. The User Authentication Services window will open.
To change user browsing settings for the Active Directory external authentication
service:
1. Click the Users tab.
2. Click Authentication Services in the top navigation bar. The User Authentication Services
window will open.
90Rack Power Manager Installer/User Guide