User Guide

6 Rack Mount LCD KVM Assembly Installer/User Guide
NOTE: The two consecutive left Ctrl keystrokes and the following command
key(s) should be pressed within two seconds or the hotkey sequence will not be
validated. Port number selections must be made using the numeric keys on the
keyboard. Numeric keys on the keypad are not available as hotkey commands.
Table 1.5: Hotkey Commands and Descriptions
Function Keystrokes Description
Port Switch
Left Ctrl + Left Ctrl + 1-8
Selects the desired port channel by
number (port 1-8)
Left Ctrl + Left Ctrl + F1 - F8
Selects port channels 9-16
Left Ctrl + Left Ctrl + Up or
Down Arrow
The Up Arrow selects the next
channel; the
Down Arrow selects the
previous channel
Beep
Left Ctrl + Left Ctrl + B
Turns the beep function on or off in
Scan Mode (default is on)
Auto Scan
Left Ctrl + Left Ctrl+ S
Allows you to exit Auto Scan by
pressing any key
Reset
Assembly
Left Ctrl + Left Ctrl + R
Resets the LCD KVM assembly
Reset Mouse
Left Ctrl + Left Ctrl + M
Resets the mouse
Reset
Keyboard
Left Ctrl + Left Ctrl + K
Reset the keyboard
OSD Menu
Left Ctrl + Left Ctrl +
spacebar (or double-click
the right mouse button)
Displays the OSD menu