User Guide

4 Rack Mount LCD KVM Assembly Installer/User Guide
CAUTION: Rack Loading - Overloading or uneven loading of racks may result in
shelf or rack failure, causing damage to equipment and possible personal injury.
Do not exceed your rack load rating.
Figure 1.4: Rack mounting the assembly
To mount the Rack Mount LCD KVM Assembly:
1. Attach the front of the Rack Mount LCD KVM Assembly to the
front of your rack cabinet using the screws provided.
2. Standing behind the assembly, slide the mounting brackets into the
slots on the side of the unit.
3. Secure the brackets to the rear of the rack using the screws
provided.
To connect the Rack Mount LCD KVM Assembly:
1. Plug one end of the supplied power cord into the back of the
assembly and the other end into an appropriate power source.
2. Connect your servers to an available port on the rear of your Rack
Mount LCD KVM Assembly using the appropriate cable.
Front of rack
Rear of rack