Rack Mount LCD KVM Assembly Installer/User Guide
Japanese Notification Chinese Notification Taiwanese Notification
Rack Mount LCD KVM Assembly Installer/User Guide Avocent, the Avocent logo and The Power of Being There are registered trademarks of Avocent Corporation or its affliates in the U.S. and other countries. All other marks are the property of their respective owners. © 2010 Avocent Corporation. All rights reserved.
Instructions This symbol is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. Dangerous Voltage This symbol is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. Power On This symbol indicates the principal on/off switch is in the on position.
iii TABLE OF CONTE NTS Table of Contents Chapter 1: Installation...............................................................1 Introduction.............................................................................................1 Getting Started ........................................................................................1 Installation ..............................................................................................1 Introduction of I/O ports for each model...................
iv Rack Mount LCD KVM Assembly Installer/User Guide
1 CHAP TE R Installation 1 Introduction Supporting both USB and PS/2 interfaces, the Rack Mount LCD KVM Assembly can control up to 16 servers. Built-in keyboard, video and mouse (KVM) peripherals not only save valuable cabinet space, but also enable direct channel selection via on-screen display (OSD) or keyboard hotkeys. Time-out and password protection offer secure access to the Rack Mount LCD KVM Assembly, while the hot-plug feature allows for uninterrupted switching and usage.
2 Rack Mount LCD KVM Assembly Installer/User Guide NOTE: Linux users may experience mouse failure if hot-plugging directly to the assembly. If your mouse becomes locked, use the mouse reset hotkeys to reset your mouse, or turn the Linux server off before connecting it to the assembly.
Chapter 1: Installation 3 Table 1.2: Description of Figure 1.2 (Continued) Number Description 3 Ground 4 Console port 5 PC connection ports (8) Figure 1.3: Rear View of a single-port Rack Mount LCD KVM Assembly Table 1.3: Description of Figure 1.
4 Rack Mount LCD KVM Assembly Installer/User Guide CAUTION: Rack Loading - Overloading or uneven loading of racks may result in shelf or rack failure, causing damage to equipment and possible personal injury. Do not exceed your rack load rating. Rear of rack Front of rack Figure 1.4: Rack mounting the assembly To mount the Rack Mount LCD KVM Assembly: 1. Attach the front of the Rack Mount LCD KVM Assembly to the front of your rack cabinet using the screws provided. 2.
Chapter 1: Installation 3. 5 Turn on all connected servers. Keyboard and mouse recognition is now activated and your Rack Mount LCD KVM Assembly is ready for operation. After installation, turn on your Rack Mount LCD KVM Assembly and then any attached computer. The default password is not required, simply press Enter to continue. Refer to the following table for a list of push-button functions available via the LCD monitor. Table 1.
6 Rack Mount LCD KVM Assembly Installer/User Guide Table 1.
Chapter 1: Installation 7 Accessing and using the OSD menu Right-click the mouse button twice or press Ctrl + Ctrl + Spacebar to access the following OSD Menu. Figure 1.5: OSD Menu Table 1.6: OSD Menu Key Heading Description NO. Port numbers On line System on QV Quick view Name Port name A single click on the left mouse button allows you to switch to a chosen PC port. Use the up or down arrows to highlight your selection, and then press Enter to make your selection.
8 Rack Mount LCD KVM Assembly Installer/User Guide Table 1.7: OSD Functions Function Key Submenu/Description LST F1 All - Lists all ports Power On - Lists only ports that have a PC turned on Quick View - Lists only Quick View ports Scan F2 All - Scans all ports Power On - Scans only ports that have a PC turned on Quick View - Scans only Quick View ports Set F3 Scan Time - Sets scan time (default = 5 secs.) Port Time - Sets port time (default = 5 secs.
9 AP PE NDICE S Appendices Appendix A: Product Specifications Table A.1: Rack Mount LCD KVM Assembly Specifications LCD LCD Type XGA TFT Display Area 17” Resolution 1280 x 1024 Luminance 250 cd/m2 ( T Y P) Contrast Ratio 800:1 ( T Y P) Back Light CCFL 2 lamps Pixels Intervals (mm) 0.264 (H) x 0.
10 Rack Mount LCD KVM Assembly Installer/User Guide Table A.1: Rack Mount LCD KVM Assembly Specifications (Continued) Wheel Supports wheel function Operating System Supports Windows® Me/NT/2000/XP/7 MTBF > 10,000,000 times Assembly (8-port and 16-port versions) PC Connection Ports 8 or 16 PC Selection OSD Menu/Hotkey Auto Scan Intervals 5-99 Secs VGA Resolution 1920 x 1440 VGA Bandwidth 200 MHz Power Supply Alternating Current Input (A) 100-240VAC/50-60Hz/<1.
For Technical Support: www.avocent.
