User Guide

Unit Minimum Maximum
CM 60.96 60960
If you enter a size too small or too large, a tool tip shows the correct size to enter.
To create a new floor plan:
1. Select File - New from the menu options.
-or-
Click New Plan on the toolbar.
2. The new plan dialog box opens containing fields for the plan information including the initial width and
height of the room.
3. Enter the appropriate information for the new floor plan and click Create. Required fields are indicated with
an asterisk (*).
NOTE: Floor plan names are unique. If you try to use a current floor plan name, an error message displays. Change the plan name
and try again.
NOTE: You must enter width and depth. If you omit these fields, an error message displays stating the width must be between 2 and
2000 feet and depth must be between 1 and 1000. The only way to change floor plan dimensions is to export the floor plan, change
the dimensions in the spreadsheet and import to update.
4. The system opens a new floor plan with a tile system of the specified size. The plan includes a grid that
consists of two-foot square tiles representing the floor tile system.
5. Select Devices to add racks. Use the toolbar to add walls, doors or windows.
Field Description
*Plan name New floor plan name. This is a required field.
Contact
Name Contact name.
Phone Contact phone number.
Address
Street 1 Contact address.
Street 2 Contact address.
City Contact city.
State Contact state.
Zip Contact zip code.
Country Contact country.
Global Coordinates
Latitude Plan latitude.
Longitude Plan longitude.
Initial Plan Size
*Width (ft) Floor plan width. This is a required field.
*Depth (ft) Floor plan depth. This is a required field.
Table 11.3: New Floor Plan Properties
82 Data Center Planner Installer/User Guide