User Guide

2. In each case, a confirmation message prompts you to delete the selected item. Click Yes to delete.
Doors and windows
Doors and windows can be placed on perimeter and interior walls. Doors can swing inward or outward, left or
right.
To add doors or windows to the floor plan:
1. Open a floor plan and click a Door or Window on the toolbar.
2. Click on the floor plan and place the object on a wall.
3. To change properties, select Properties and edit the information. Click Save.
NOTE: Windows and doors do not remain anchored to walls that are moved. They must be moved independently.
To update doors and windows:
1. Click a Door or Window on the floor plan, and select Properties.
2. Edit the information. Click Save.
Field Description
Door Properties
Width Width of the door, default is feet.
Units Units of measure.
Door Swing Properties
Change swing direction The standard door can swing in or out of an inter or perimeter wall.
Swap hinge side The hinges can be mounted on the left or right of a door.
Window Properties
Width Width of the window, default is inches
Units Units of measure.
Table 9.7: Door and Window Properties
To delete doors and windows:
1. Select a Door or Window and press the Delete key.
-or-
Right-click and select Delete. A confirmation message appears asking if you want to delete the selected
item.
2. Click Yes to delete the item.
Shapes - ovals and rectangles
Shapes can be added to the floor plan in the form of ovals and rectangles. They can be stretched, rotated or
moved with drag and drop actions. They can be deleted, moved and changed in the properties pane. They can
also be resized by using the resize button on the right, bottom of the shape.
To add a shape to a floor plan:
1. Click an Oval or Rectangle on the toolbar.
52 Data Center Planner Installer/User Guide