User Guide

Wall Points
When points are added to a wall, the wall can be dragged to many configurations. Any number of points can be
placed on any location on a wall.
To add points to a wall:
1. Select Add Points on the toolbar and click on the wall. A point is added where you clicked.
2. Add a point at a different location.
3. Click Wall on the toolbar, then click between the two added points to move the wall out to a different
configuration.
To delete points on perimeter walls:
1. To delete a point, click Remove Points on the toolbar and click on the point to be deleted.
2. The point is deleted with no confirmation.
Annotations
Annotations can be added to a floor plan at any time and placed in any position. Any number of notes can be
added to a floor plan.
To add an annotation:
1. In a current floor plan, click Annotation on the toolbar.
2. Click on the floor plan. A box for text appears.
3. Double-click on the area to change the text. Press Enter to add an additional line. Select the Properties
pane to view or change the properties.
Property Value
Rotation Degrees rotated.
Origin X (ft) Annotation X origin, which the top, left corner.
Origin Y (ft) Annotation Y origin in the top, left corner.
Units Units of measure.
Table 9.6: Annotation Properties
To update an annotation to a floor plan:
1. Click in the note area and change the text.
2. Click the Rotation icon to rotate the note area.
-or-
Select Properties to make changes. If modifications are made in properties, click Save.
To delete an annotation:
1. Click on the text of annotation and click Delete.
-or-
Right-click on the text, and select Edit - Delete.
Chapter 9: Functional Components 51