User Guide

Figure 11.5: Connections Table
To view the connections table:
1. In Connection View, with devices connected, click the Connections Table tab.
2. In the Number of Routes field, enter a number. This limits the number of routes shown.
3. To view a type of connection, select All, Power or Data from the Type drop-down list.
• All is the default and includes all connection types. Unknown type is only available in the All
category.
• Data generates routes that consist only of data port type connections for both port 1 and port 2 of each
connection. For each 2-port connection, if one port is data and the other port is power or unknown, the
routes associated with this connection are not included in the reported routes.
• Power generates the routes that consist only of power type connections for both port 1 and port 2 of
each connection. For each 2-port connection, if one port is power and the other port is data or unknown,
the routes associated with this connection are not included in the reported routes.
4. Click Display to view the number of routes and type for the connections specified.
As an example, the following table shows all connections between device A and B including intermediate
devices C and D.
Routes From Device From Port Parent of From Port To Device To Port Parent of To Device
Route 1 Device A Port 1 Rack 1 Device C Port 1 Rack 1
Route 1 Device C Port 2 Rack 1 Device B Port 1 Rack 2
Route 2 Device A Port 2 Rack 1 Device D Port 1 Rack 2
Route 2 Device D Port 2 Rack 2 Device B Port 2 Rack 2
Table 11.6: Connections Table Descriptions
Chapter 11: Views 99