User Guide

3. Click Save.
To delete a connection:
1. In connection view, open the two assets with connections.
2. The system highlights the connection in the table and on the connections screen.
3. Select one of the connections, right-click on the connected port and select Delete Connection.
NOTE: If an asset is deleted in connection view, the connection is deleted.
Locking ports
If a port is bad or should not be used, you have the option to lock it.
To lock a port:
1. In connection view, have the asset with the port to be locked visible.
2. Select the port in the table, and select Properties.
3. In connection properties, under current port, enable the Locked checkbox.
4. Click Save. The locked port is shown with red border.
5. The table corresponding with the asset shows the locked port in the locked column.
Connections table
This option allows you to view the connections between two devices, including intermediate devices. When the
Connections Table is opened in Connection View, the port-to-port connections are shown in a table. You can
also export the connection information to a .pdf file.
98 Data Center Planner Installer/User Guide