User Guide

Accessing the Console Server via the Web Manager.....61
FramedFilterID = group_name=admin;
During the authentication phase, the console server will receive the attribute FramedFilterID from
the RADIUS server. The user regina belongs to authorization group RADIUS_1 and RADIUS_2.
and the user special belongs to authorization group admin.
To configure group an LDAP authentication server:
On the LDAP server, edit the info attribute for the user and add the following syntax.
info: group_name=<Group1>[,<Group2>,...,<GroupN>];
DSView software access rights
An administrator can configure how the DSView software's viewer session rights will be mapped to
the console server's access rights when a user accesses a target via the DSView software's serial
viewer.
To configure the map of DSView software access rights to console server access rights:
1. Click Users Authorization DSView Access Rights.
2. Select the desired access rights and click Save.
Event Notifications
The console server will generate notifications for a variety of events. You can configure the console
server to direct or store those event notifications to various destinations for immediate use or for
analysis later.
Event List
The Event List screen lists console server events, each of which can be configured for SNMP
Traps, Syslog, DSView software, Email and SMS.
To configure Events:
1. Click Events and Logs - Events.
2. Locate the events for which you want notification sent and select the checkbox(es) next to the
event number(s).
3. Click Edit.
4. If you want an event notification sent for any configured event destination type, click its
associated Send checkbox.
5. Click Save. The Events page appears with an X in the column below the destination type if the
Send box was checked on the Events Settings screen.