User Guide

Accessing the Console Server via the Web Manager.....39
Parameter Description
Transmission
Interval
The interval the port waits to send data to a remote client in milliseconds. Default: 20.
Break
Sequence
An administrator can configure the control key as the break sequence, entering ^ before the
letter. Not available for Raw. Default: ~break.
Break Interval Interval for the break signal in milliseconds. Not available for Raw. Default: 500.
Log In/Out
Multi Session
Notification
Enables the notification to multi-session users when a new user logs in or a user logs out. Not
available for Raw. Default: Disabled.
Informational
Message
Notification
Displays an information message when a target session is opened. Not available for Raw.
Default: Enabled.
Data
Buffering
Status Enables or disables data buffering. Default: Disabled.
Type
Displays the type of data buffering: Local - stores the data buffering file in the local file
system. NFS - stores the data buffering file in the NFS server. Syslog - sends the data to the
syslog server. DSView - sends the data to the DSView software. Default: Local.
Time Stamp
When enabled, adds the time stamp to the data buffering line for a Local or NFS database.
Default: Disabled.
Log-in/out
Message
Includes special notification for logins and logouts in data buffering. Default: Disabled.
Serial Session
Logging
Enabled - stores data at all times. Disabled - stores data when a CAS session is not opened.
Default: Enabled.
Alerts
Status
A special event notification will be generated when input data matches one of the alert strings.
Default: Disabled.
Alert Strings Strings used to generate event notifications. Default: Empty.
Scripts
Name of shell script that will be called when there is match of the alert string in the line. The
script will be called with two arguments: the port number and the line where the match
happened.
To configure the Dial-in Profile for a serial port with a connected modem:
1. Select Ports - Serial Ports.
2. Click the checkbox for a serial port with a connected modem.
3. Click the Set Dial button and use the drop-down menus to configure the dial-in settings.
4. Configure the PPP parameters (address, authentication and so on) and click Save.
Parameter Description
Status Enables or disables the port. Default: Disabled.
Speed The speed that will be used by mgetty to configure the serial device. Default: 38400 bps.
Init Chat Chat for modem initialization. Default: "" \d\d\d+++\d\d\dATZ OK.
PPP Address
Configures the local and the remote IP address for the the PPP link. If Accept Configuration
from Remote Peer is selected, the remote peer should send both IP addresses (local and
remote) during negotiation. Default: No Address.
Dial-in Parameters