User Guide
Field or Menu Option Description
Community
SNMP v1 and v2 only. A Community defines an access environment. The
type of access is classified under Permission: either read only or read write.
The most common community is public.
NOTE: Take caution in using a public community name as it is commonly
known. By default, the public community cannot access SNMP information
on the console server.
Source
SNMP v1 and v2 only. Valid entries are default or a subnet address, for
example, 193.168.44.0/24.
OID Object Identifier. Each managed object has a unique identifier.
Permission
Read Only access to the entire MIB except for SNMP configurationobjects.
Read/Write access to the entire MIB except for SNMP configurationobjects.
User Name and Password SNMP v3 only.
Clicking the Add or Edit buttons under SNMPv1/SNMPv2 Configuration displays the
New/Mod SNMP v1 v2 Configuration dialog box.
Clicking the Add or Edit buttons under SNMPv3 Configuration displays the New/Mod SNMP
v3 Configuration dialog box.
To configure SNMP:
1. Go to Networks - SNMP. The SNMP form appears.
2. To enable any version of SNMP, perform the following:
a. To add an SNMPv1/SNMPv2 entry, press the Add button under the SNMPv1/SNMPv2
Configuration table.
b. To add an SNMPv3 entry, press the Add button at the bottom of the SNMPv3
Configuration table. The New/Modify SNMP Daemon Configuration dialog box
appears.
3. To edit any SNMP configuration, perform the following steps.
a. For SNMPv1 or SNMPv2 select the entry from the SNMPv1/SNMPv2 configuration
list and click the Edit button.
b. To edit an SNMPv3 entry, select an entry from the SNMPv3 Configuration list and
click the Edit button. The New/Modify SNMP Daemon Configuration dialog box
appears.
78 Cyclades
®
ACS5000 Installation/Administration/User Guide