User Guide

be available if there is at least one port configured as Power Mgmt or there is at least one IPMI
server configured). The Power Management form appears.
You can use this form to make it possible for a user who is connected to a device through the
selected serial port to perform power management. While connected to the device, the user
displays a power management menu or dialog box by entering a hotkey.
NOTE: Enable power management on this form refers to IPDU power management, Applications - IPDU Power
Mgmt.
Additional fields appear on the form if Enable Power management on this port and Enable IPMI
on this port are checked.
The following table describes the available fields in the power management form.
Field Name Definition
Enable Power Management
on this Port
Check mark to enable Power Management on the the selectedport(s).
Enable IPMI on this port Check mark to enable IPMI on the selected port(s).
IPMI Key
(available only if IPMI is
enabled)
The key sequence which the authorized user(s) can use to perform IPMI power
management.
The default for IPMI power management is Ctrl+Shift+i (^I).
IPMI Server
(available only if IPMI is
enabled)
Select the device configured for IPMI power management.
PowerMgmt Port View listbox for the PM enabled ports and the assigned outletnumbers.
Power Management Key
The key sequence which the authorized user(s) can use to perform power
management.
The default for IPDU power management is Ctrl+p (^p).
Allow All Users
Radio button to allow all users to perform power management on the configured
port.
Allow Users/Groups
Radio button to allow only selected users or groups to perform power
management on the configured port.
Table 9.9: Expert - Power Management Form Fields
Chapter 9: Ports Menu and Forms 119