Installation guide

Quick Installation Guide
00825-0100-4825, Rev DB
February 2011
Rosemount 248
13
PRODUCT CERTIFICATIONS
Approved Manufacturing Locations
Rosemount Inc. – Chanhassen, Minnesota, USA
Rosemount Temperature GmbH – Germany
Emerson Process Management Asia Pacific – Singapore
European Union Directive Information
The EC declaration of conformity for all applicable European directives for this product can
be found on the Rosemount website at www.rosemount.com. A hard copy may be obtained
by contacting our local sales representative.
ATEX Directive (94/9/EC)
Rosemount Inc. complies with the ATEX Directive.
Electro Magnetic Compatibility (EMC) (89/336/EEC)
All Models: EN 50081-1: 1992; EN 50082-2:1995; EN 61326-1:1997 – Industrial
NAMUR NE21 Recommendations
The Rosemount 248 meets the requirements for NAMUR NE21 Rating
CE Mark
The Rosemount 248 meets all requirements listed under IEC 61326:Amendment 1, 1998
Susceptibility Parameter Influence
ESD
• 6 kV contact discharge
• 8 kV air discharge
None
Radiated
• 80 – 1000 MHz at 10 V/m AM
None
Burst
• 1 kV for I.O.
None
Surge
• 0.5 kV line–line
• 1 kV line–ground (I.O. tool)
None
Conducted
• 150 kHz to 80 MHz at 10 V
None
00825-0100-4825.fm Page 13 Friday, February 18, 2011 11:49 AM