FAQ

What is the maximum length of control line run?
The maximum length of a control line run depends on what type and size of control wire is used. The
NEC requirements still rule on this case.
Where can I get the weight and dimensions of the ATS?
Click here to get the standard shipping weights of the ATS. For more detailed info, refer to the Outline
and Mounting Diagrams
What size cable or wire can I use for the power connections of the ATS?
Click here for the recommended wire sizes. You may also refer to the Outline and Mounting Diagrams for
more information.
When do I need to connect the neutral?
You need to connect the neutral:
If it is required by the local code on the installation.
If the ATB is switching line to neutral loads.
If the transfer switch is installed for service entrance.
NOTE: All local code requirements should always be followed.