FAQ
Product Installation
Can the ATS switch between different voltages?
No. The ATS is designed to get the supply from the source that the transfer switch is connected to. The
switch should get the same voltage coming from Normal and Emergency since the same supply is fed to
the solenoid operator (which has a specific voltage rating). This is the standard design of a 7ATS. If the
switch is to be installed on a facility with different voltage supplied from Normal and Emergency, a
customized design can be done on the factory to meet this requirement.
If it is pre-sale application, contact Application Engineering at 1-800-800- ASCO (2726) option 32. If it is
post sale application, contact ASI at 1-800-
800-ASCO (2726) option 23.
How do I configure the ATS controller?
The controller configuration depends on the specifications of the switch. Once you’ve verified the
specification based on the Bill Of Materials (BOM), Catalog no. or Serial no., and then you may refer to
the Group 5 User’s Guide for the corresponding adjustments.