Installation Manual

Index ASCO 5350
Page 12 Copyright 2014 ASCO Power Technologies. All rights reserved. 381333-315 D
Index
A
address
controller, 8
IP, 2, 4, 5, 6
alarm buzzer, 3, 8, 10
alarm light, relay
alarm silence button, refer to
User’s Guide 381333-314
annunciator, configuration, 14
ATS configuration, 7
ATS controller, 1, 8
ATS name, ATS no., 7, 8, 9
auto discovery, 8
B
bezel release, 2
buttons, refer to
User’s Guide 381333-314
buzzer configuration, 3, 6
bypass (cancel) transfer time delay,
refer to User’s Guide 381333-314
C
cable, communication, 2, 3,
wiring diagram 834969
change password, 4
communication architecture, 3
communication check, 4
communication wiring, 3,
wiring diagram 834969
Configurations, ATS configuration, 7
ATS Remote Annunciator, 5
connections, 3
Connectivity Module (CM) 5150,
3, 11, refer to Installation
Manual 381333-238
control key switch, 4, 11
controller, ATS, 1, 8
controller address, protocol, 8
controller password, 8
custom ATS labels, 2
D
diagnostics, 10
digital input, 10
discover, 11
F
factory default information, 2
firmware update, 5
functional test, 4
G
gateway address, 2, 4, 6
Group 5 controller, 8
H
HELP, 800-800-2726 (ASCO),
[e-mail]
I
initial checks, 4
installation, 3
internal buzzer and alarm relay, 3
Internet Protocol, 7
IP address, 2, 4, 5, 6
K
key switch, Control, 11, refer to
User’s Guide 381333-314
L
labels, 2, 9
lamp test button, 4, 11
lights, 4, 11, refer to
User’s Guide 381333-314
login, 2, 4, 5
M
mounting, 3
multiple ATSs connected to single CM,
9
N
name, 5
O
operation, refer to
User’s Guide 381333-314
P
packet, 10
password, 2, 4, 8, 11
port number
Power Manager (PM), 8
power on light, 4, 11
print label, 2, 9
R
ratings, 2
reboot, reset, refer to
User’s Guide 381333-314
S
save configuration, 9
select an ATS configuration, 7
single ATS connected to single CM, 5,
7
specifications, 2
software version, 5
subnet mask, 2, 4, 6
T
test, lamp button, 4, 11
time delay, transfer, bypass (cancel),
refer User’s Guide 381333-314
Transfer button, 16
troubleshooting, 11
U
update, save configuration, 6
update, firmware, 9