User Guide

Commissioning Assistant
29-6
29.4.3. Post Power Check Screen
Figure 141. Post Power Check Screen (BDS-256 only) (Comm Asst)
Click the Post Power Check button. Verify the DCM addresses by clicking “Run DCM
Addr Check” button then, at the “Running DCM Address Check” message click Yes to check
all DCM addresses. Also, clear the data memory by clicking the “Clear Memory” button then,
at the "Clear Monitor Memory" message click Yes and the memory is cleared. After
verification, the DCM Addresses Verified box is automatically checked.
Note: The MPM does not have dip switch settings.